Air Quality Index World

photo src: www.nasa.gov

An air quality index (AQI) is a number used by government agencies to communicate to the public how polluted the air currently is or how polluted it is forecast to become. As the AQI increases, an increasingly large percentage of the population is likely to experience increasingly severe adverse health effects. Different countries have their own air quality indices, corresponding to different national air quality standards. Some of these are the Air Quality Health Index (Canada), the Air Pollution Index (Malaysia), and the Pollutant Standards Index (Singapore).

photo src: www.reddit.com

Maps, Directions, and Place Reviews

Definition and usage

Computation of the AQI requires an air pollutant concentration over a specified averaging period, obtained from an air monitor or model. Taken together, concentration and time represent the dose of the air pollutant. Health effects corresponding to a given dose are established by epidemiological research. Air pollutants vary in potency, and the function used to convert from air pollutant concentration to AQI varies by pollutant. Air quality index values are typically grouped into ranges. Each range is assigned a descriptor, a color code, and a standardized public health advisory.

The AQI can increase due to an increase of air emissions (for example, during rush hour traffic or when there is an upwind forest fire) or from a lack of dilution of air pollutants. Stagnant air, often caused by an anticyclone, temperature inversion, or low wind speeds lets air pollution remain in a local area, leading to high concentrations of pollutants, chemical reactions between air contaminants and hazy conditions.

On a day when the AQI is predicted to be elevated due to fine particle pollution, an agency or public health organization might:

• advise sensitive groups, such as the elderly, children, and those with respiratory or cardiovascular problems to avoid outdoor exertion.
• declare an "action day" to encourage voluntary measures to reduce air emissions, such as using public transportation.
• recommend the use of masks to keep fine particles from entering the lungs

During a period of very poor air quality, such as an air pollution episode, when the AQI indicates that acute exposure may cause significant harm to the public health, agencies may invoke emergency plans that allow them to order major emitters (such as coal burning industries) to curtail emissions until the hazardous conditions abate.

Most air contaminants do not have an associated AQI. Many countries monitor ground-level ozone, particulates, sulfur dioxide, carbon monoxide and nitrogen dioxide, and calculate air quality indices for these pollutants.

The definition of the AQI in a particular nation reflects the discourse surrounding the development of national air quality standards in that nation. A website allowing government agencies anywhere in the world to submit their real-time air monitoring data for display using a common definition of the air quality index has recently become available.

Air Quality Index World Video

Indices by location

Canada

Air quality in Canada has been reported for many years with provincial Air Quality Indices (AQIs). Significantly, AQI values reflect air quality management objectives, which are based on the lowest achievable emissions rate, and not exclusively concern for human health. The Air Quality Health Index or (AQHI) is a scale designed to help understand the impact of air quality on health. It is a health protection tool used to make decisions to reduce short-term exposure to air pollution by adjusting activity levels during increased levels of air pollution. The Air Quality Health Index also provides advice on how to improve air quality by proposing behavioural change to reduce the environmental footprint. This index pays particular attention to people who are sensitive to air pollution. It provides them with advice on how to protect their health during air quality levels associated with low, moderate, high and very high health risks.

The Air Quality Health Index provides a number from 1 to 10+ to indicate the level of health risk associated with local air quality. On occasion, when the amount of air pollution is abnormally high, the number may exceed 10. The AQHI provides a local air quality current value as well as a local air quality maximums forecast for today, tonight, and tomorrow, and provides associated health advice.

Hong Kong

On the 30th December 2013 Hong Kong replaced the Air Pollution Index with a new index called the Air Quality Health Index. This index is on a scale of 1 to 10+ and considers four air pollutants: ozone; nitrogen dioxide; sulphur dioxide and particulate matter (including PM10 and PM2.5). For any given hour the AQHI is calculated from the sum of the percentage excess risk of daily hospital admissions attributable to the 3-hour moving average concentrations of these four pollutants. The AQHIs are grouped into five AQHI health risk categories with health advice provided:

Each of the health risk categories has advice with it. At the low and moderate levels the public are advised that they can continue normal activities. For the high category, children, the elderly and people with heart or respiratory illnesses are advising to reduce outdoor physical exertion. Above this (very high or serious) the general public are also advised to reduce or avoid outdoor physical exertion.

Mainland China

China's Ministry of Environmental Protection (MEP) is responsible for measuring the level of air pollution in China. As of 1 January 2013, MEP monitors daily pollution level in 163 of its major cities. The Air Pollution Index (API) level is based on the level of 6 atmospheric pollutants, namely sulfur dioxide (SO₂), nitrogen dioxide (NO₂), suspended particulates smaller than 10 ?m in aerodynamic diameter (PM₁₀), suspended particulates smaller than 2.5 ?m in aerodynamic diameter (PM_2.5), carbon monoxide (CO), and ozone (O₃) measured at the monitoring stations throughout each city.

AQI Mechanics
An individual score (IAQI) is assigned to the level of each pollutant and the final AQI is the highest of those 6 scores. The pollutants can be measured quite differently. PM_2.5?PM₁₀ concentration are measured as average per 24h. SO₂, NO₂, O₃, CO are measured as average per hour. The final API value is calculated per hour according to a formula published by the MEP.

The scale for each pollutant is non-linear, as is the final AQI score. Thus an AQI of 100 does not mean twice the pollution of AQI at 50, nor does it mean twice as harmful. While an AQI of 50 from day 1 to 182 and AQI of 100 from day 183 to 365 does provide an annual average of 75, it does not mean the pollution is acceptable even if the benchmark of 100 is deemed safe. This is because the benchmark is a 24-hour target. The annual average must match against the annual target. It is entirely possible to have safe air every day of the year but still fail the annual pollution benchmark.

AQI and Health Implications (HJ 663-2012)

India

The National Air Quality Index (AQI) was launched in New Delhi on 17 September 2014 under the Swachh Bharat Abhiyan.

The Central Pollution Control Board along with State Pollution Control Boards has been operating National Air Monitoring Program (NAMP) covering 240 cities of the country having more than 342 monitoring stations. An Expert Group comprising medical professionals, air quality experts, academia, advocacy groups, and SPCBs was constituted and a technical study was awarded to IIT Kanpur. IIT Kanpur and the Expert Group recommended an AQI scheme in 2014. While the earlier measuring index was limited to three indicators, the new index measures eight parameters. The continuous monitoring systems that provide data on near real-time basis are installed in New Delhi, Mumbai, Pune and Ahmedabad.

There are six AQI categories, namely Good, Satisfactory, Moderately polluted, Poor, Very Poor, and Severe. The proposed AQI will consider eight pollutants (PM₁₀, PM_2.5, NO₂, SO₂, CO, O₃, NH₃, and Pb) for which short-term (up to 24-hourly averaging period) National Ambient Air Quality Standards are prescribed. Based on the measured ambient concentrations, corresponding standards and likely health impact, a sub-index is calculated for each of these pollutants. The worst sub-index reflects overall AQI. Associated likely health impacts for different AQI categories and pollutants have also been suggested, with primary inputs from the medical expert members of the group. The AQI values and corresponding ambient concentrations (health breakpoints) as well as associated likely health impacts for the identified eight pollutants are as follows:

Mexico

The air quality in Mexico City is reported in IMECAs. The IMECA is calculated using the measurements of average times of the chemicals ozone (O₃), sulphur dioxide (SO₂), nitrogen dioxide (NO₂), carbon monoxide (CO), particles smaller than 2.5 micrometers (PM_2.5), and particles smaller than 10 micrometers (PM₁₀).

Singapore

Singapore uses the Pollutant Standards Index to report on its air quality, with details of the calculation similar but not identical to that used in Malaysia and Hong Kong The PSI chart below is grouped by index values and descriptors, according to the National Environment Agency.

South Korea

The Ministry of Environment of South Korea uses the Comprehensive Air-quality Index (CAI) to describe the ambient air quality based on the health risks of air pollution. The index aims to help the public easily understand the air quality and protect people's health. The CAI is on a scale from 0 to 500, which is divided into five categories. The higher the CAI value, the greater the level of air pollution. Of values of the five air pollutants, the highest is the CAI value. The index also has associated health effects and a colour representation of the categories as shown below.

The N Seoul Tower on Namsan Mountain in central Seoul, South Korea, is illuminated in blue, from sunset to 23:00 and 22:00 in winter, on days where the air quality in Seoul is 50 or less. During the spring of 2012, the Tower was lit up for 52 days, which is four days more than in 2011.

United Kingdom

The most commonly used air quality index in the UK is the Daily Air Quality Index recommended by the Committee on Medical Effects of Air Pollutants (COMEAP). This index has ten points, which are further grouped into 4 bands: low, moderate, high and very high. Each of the bands comes with advice for at-risk groups and the general population.

The index is based on the concentrations of 5 pollutants. The index is calculated from the concentrations of the following pollutants: Ozone, Nitrogen Dioxide, Sulphur Dioxide, PM2.5 (particles with an aerodynamic diameter less than 2.5 ?m) and PM10. The breakpoints between index values are defined for each pollutant separately and the overall index is defined as the maximum value of the index. Different averaging periods are used for different pollutants.

Europe

To present the air quality situation in European cities in a comparable and easily understandable way, all detailed measurements are transformed into a single relative figure: the Common Air Quality Index (or CAQI) Three different indices have been developed by Citeair to enable the comparison of three different time scale:.

• An hourly index, which describes the air quality today, based on hourly values and updated every hours,
• A daily index, which stands for the general air quality situation of yesterday, based on daily values and updated once a day,
• An annual index, which represents the city's general air quality conditions throughout the year and compare to European air quality norms. This index is based on the pollutants year average compare to annual limit values, and updated once a year.

However, the proposed indices and the supporting common web site www.airqualitynow.eu are designed to give a dynamic picture of the air quality situation in each city but not for compliance checking.

The hourly and daily common indices

These indices have 5 levels using a scale from 0 (very low) to > 100 (very high), it is a relative measure of the amount of air pollution. They are based on 3 pollutants of major concern in Europe: PM10, NO2, O3 and will be able to take into account to 3 additional pollutants (CO, PM2.5 and SO2) where data are also available.

The calculation of the index is based on a review of a number of existing air quality indices, and it reflects EU alert threshold levels or daily limit values as much as possible. In order to make cities more comparable, independent of the nature of their monitoring network two situations are defined:

• Background, representing the general situation of the given agglomeration (based on urban background monitoring sites),
• Roadside, being representative of city streets with a lot of traffic, (based on roadside monitoring stations)

The indices values are updated hourly (for those cities that supply hourly data) and yesterdays daily indices are presented.

Common air quality index legend:

The common annual air quality index

The common annual air quality index provides a general overview of the air quality situation in a given city all the year through and regarding to the European norms.

It is also calculated both for background and traffic conditions but its principle of calculation is different from the hourly and daily indices. It is presented as a distance to a target index, this target being derived from the EU directives (annual air quality standards and objectives):

• If the index is higher than 1: for one or more pollutants the limit values are not met.
• If the index is below 1: on average the limit values are met.

The annual index is aimed at better taking into account long term exposure to air pollution based on distance to the target set by the EU annual norms, those norms being linked most of the time to recommendations and health protection set up by World Health Organisation.

United States

The United States Environmental Protection Agency (EPA) has developed an Air Quality Index that is used to report air quality. This AQI is divided into six categories indicating increasing levels of health concern. An AQI value over 300 represents hazardous air quality and below 50 the air quality is good.

The AQI is based on the five "criteria" pollutants regulated under the Clean Air Act: ground-level ozone, particulate matter, carbon monoxide, sulfur dioxide, and nitrogen dioxide. The EPA has established National Ambient Air Quality Standards (NAAQS) for each of these pollutants in order to protect public health. An AQI value of 100 generally corresponds to the level of the NAAQS for the pollutant. The Clean Air Act (USA) (1990) requires EPA to review its National Ambient Air Quality Standards every five years to reflect evolving health effects information. The Air Quality Index is adjusted periodically to reflect these changes.

Computing the AQI

The air quality index is a piecewise linear function of the pollutant concentration. At the boundary between AQI categories, there is a discontinuous jump of one AQI unit. To convert from concentration to AQI this equation is used:

${\displaystyle I={\frac {I_{high}-I_{low}}{C_{high}-C_{low}}}(C-C_{low})+I_{low}}$

where:

EPA's table of breakpoints is:

Suppose a monitor records a 24-hour average fine particle (PM_2.5) concentration of 12.0 micrograms per cubic meter. The equation above results in an AQI of:

corresponding to air quality in the "Good" range. To convert an air pollutant concentration to an AQI, EPA has developed a calculator.

If multiple pollutants are measured at a monitoring site, then the largest or "dominant" AQI value is reported for the location. The ozone AQI between 100 and 300 is computed by selecting the larger of the AQI calculated with a 1-hour ozone value and the AQI computed with the 8-hour ozone value.

8-hour ozone averages do not define AQI values greater than 300; AQI values of 301 or greater are calculated with 1-hour ozone concentrations. 1-hour SO₂ values do not define higher AQI values greater than 200. AQI values of 201 or greater are calculated with 24-hour SO₂ concentrations.

Real time monitoring data from continuous monitors are typically available as 1-hour averages. However, computation of the AQI for some pollutants requires averaging over multiple hours of data. (For example, calculation of the ozone AQI requires computation of an 8-hour average and computation of the PM_2.5 or PM₁₀ AQI requires a 24-hour average.) To accurately reflect the current air quality, the multi-hour average used for the AQI computation should be centered on the current time, but as concentrations of future hours are unknown and are difficult to estimate accurately, EPA uses surrogate concentrations to estimate these multi-hour averages. For reporting the PM_2.5, PM₁₀ and ozone air quality indices, this surrogate concentration is called the NowCast. The Nowcast is a particular type of weighted average that provides more weight to the most recent air quality data when air pollution levels are changing.

Public Availability of the AQI

Real time monitoring data and forecasts of air quality that are color-coded in terms of the air quality index are available from EPA's AirNow web site. Historical air monitoring data including AQI charts and maps are available at EPA's AirData website.

History of the AQI

The AQI made its debut in 1968, when the National Air Pollution Control Administration undertook an initiative to develop an air quality index and to apply the methodology to Metropolitan Statistical Areas. The impetus was to draw public attention to the issue of air pollution and indirectly push responsible local public officials to take action to control sources of pollution and enhance air quality within their jurisdictions.

Jack Fensterstock, the head of the National Inventory of Air Pollution Emissions and Control Branch, was tasked to lead the development of the methodology and to compile the air quality and emissions data necessary to test and calibrate resultant indices.

The initial iteration of the air quality index used standardized ambient pollutant concentrations to yield individual pollutant indices. These indices were then weighted and summed to form a single total air quality index. The overall methodology could use concentrations that are taken from ambient monitoring data or are predicted by means of a diffusion model. The concentrations were then converted into a standard statistical distribution with a preset mean and standard deviation. The resultant individual pollutant indices are assumed to be equally weighted, although values other than unity can be used. Likewise, the index can incorporate any number of pollutants although it was only used to combine SOx, CO, and TSP because of a lack of available data for other pollutants.

While the methodology was designed to be robust, the practical application for all metropolitan areas proved to be inconsistent due to the paucity of ambient air quality monitoring data, lack of agreement on weighting factors, and non-uniformity of air quality standards across geographical and political boundaries. Despite these issues, the publication of lists ranking metropolitan areas achieved the public policy objectives and led to the future development of improved indices and their routine application.

Source of the article : Wikipedia